Measure indoor air quality – good to know what’s in the air.
air-Q analyzes air quality, detecting fine particulate matter, carbon monoxide, chemicals, radon and other pollutants.
No one has more sensors — measuring every air component.
The air-Q captures and monitors air quality in real time and analyzes it in terms of its effect on your health and performance. Learn more about what’s in the air you breathe. There are different air-Q variants with different sensors.
Our Measurement Parameters / Sensors:
Hydrogen (H₂)
Hydrogen only occurs stably as molecular hydrogen (H₂) and is a colorless and odorless gas. It reacts quickly with oxygen (O₂) to form water, releasing energy in the process. H₂ is non-toxic but has flammable/explosive properties.
Volatile Organic Compounds (VOC)
VOCs (Volatile Organic Compounds) are organic, carbon-containing compounds that evaporate even at low temperatures. In many cases, VOCs are largely harmless to living organisms — despite affecting well-being. However, this group of substances also includes health-critical compounds such as formaldehyde.
Air Temperature (T)
Air temperature has a significant influence on the reaction rate of chemical processes and therefore on the human metabolic process. Measuring it is therefore worthwhile. Temperatures that are too high or too low can negatively affect both mental and physical health.
Dew Point (Td)
The dew point describes the temperature at which relative humidity reaches 100% and the water vapor present in the air would immediately begin to condense into water.
Nitrogen Dioxide (NO₂)
Nitrogen dioxide (NO₂) belongs to the group of nitrogen oxides. It is a reddish-brown gas with a pungent odor similar to chlorine. NO₂ has a strongly irritating effect on the respiratory tract and promotes asthma.
Hydrogen Sulfide (H₂S)
Hydrogen sulfide is a colorless, foul-smelling, and highly toxic gas that is combustible and readily flammable. It has the characteristic odor of rotten eggs and forms when proteins from sulfur-containing amino acids are broken down by putrefactive and sulfur bacteria.
Sulfur Dioxide (SO₂)
Sulfur dioxide is a colorless irritant gas with a pungent smell and sour taste, perceptible to humans at a concentration between 0.8 and 4.0 mg/m³.
Oxygen (O₂)
Molecular oxygen (O₂) is a colorless and odorless gas that makes up 21% of the air. On the Earth's surface, oxygen is – by mass – the most abundant element.
Radon (Rn)
Radon is a noble gas whose decay releases radioactive particles (known as alpha radiation).
Ozone (O₃)
Ozone (O₃) near the ground forms through the reaction of oxygen, nitrogen oxides, and volatile organic compounds under intense sunlight. Even slightly elevated concentrations cause strong irritation of the mucous membranes and respiratory tract.
Methane (CH₄)
Methane is a flammable gas and the main component of heating gas.
Relative Humidity (ρ)
Humidity refers to the proportion of water vapor in the gas mixture of the air. Excessively high or low humidity indoors can negatively affect human well-being and health.
Absolute Humidity (φ)
Absolute humidity describes water vapor density: the mass of water vapor contained in a defined volume of air.
Air Pressure (p)
Air pressure results from the continuous movement of air masses. As part of the atmospheric environmental conditions, it directly affects human health and well-being.
Light / Illuminance (lx)
The light sensor measures light intensity by detecting the brightness of incoming light and converting it into a digital signal. It only takes into account the light spectrum visible to the human eye and ignores infrared and ultraviolet radiation.
Noise Peak Level (Lp_max)
Unlike the ongoing "normal" noise value, the noise peak value reflects acute noise events — such as a short loud bang at night. These events, documented by the noise peak value, can abruptly interrupt rest periods and cause stress.
Noise (Lp)
Sound becomes noise when unwanted sounds are perceived as disturbing, annoying or impairing. As a psychosocial stress factor, noise can significantly impair well-being and performance.
Nitrous Oxide (Dinitrogen Monoxide) (N₂O)
Dinitrogen monoxide is a colorless, tasteless gas with a slightly sweetish odor. Known as nitrous oxide, it is best known in medicine as a pain-relieving and anesthetic agent.
Carbon Monoxide (CO)
Carbon monoxide (CO) is formed, among other things, by the incomplete combustion of carbon-containing substances. The colorless, odorless and tasteless gas is a potent respiratory poison that quickly reaches dangerous concentrations in unventilated rooms.
Carbon Dioxide (CO₂)
Carbon dioxide (CO₂) is one of the natural components of air and an important greenhouse gas in the Earth's atmosphere. Excessive carbon dioxide concentrations indoors lead to reduced performance and fatigue, up to life-threatening shortness of breath.
Formaldehyde (CH₂O)
Formaldehyde is a colorless, pungent-smelling substance that is gaseous at room temperature. Due to its use in adhesives, formaldehyde is now very widespread indoors and is found in many wood-based materials and furniture.
Particulate Matter (PM₁ – PM₂.₅ – PM₁₀)
Particulate matter refers to a mixture of solid and liquid suspended particles with a very small diameter. Depending on particle size and composition, particulate matter can have a lasting impact on the respiratory tract and the cardiovascular system. The air-Q air analyzer can measure particulate matter of different particle sizes (PM₁₀, PM₂.₅, PM₁).
Chlorine / Chlorine Gas (Cl₂)
Chlorine (Cl₂) is a toxic, greenish gas with high reactivity. At low concentrations it irritates mucous membranes and the respiratory tract; at high concentrations it is corrosive.
Ammonia (NH₃)
Ammonia (NH₃) is a pungent-smelling, colorless and toxic gas. It irritates the eyes and respiratory tract and has a suffocating effect. As a raw material, ammonia is one of the most heavily produced industrial chemicals of all. In nature it occurs as a reaction product of urea and various salts.
Identify pollution sources
The air-Q precisely and continuously checks all important parameters of the air you breathe and alerts you to immediate exposure. Some problems only become noticeable over time — for example, unnoticed exposure from passing commuter traffic.
Health & Productivity
The air-Q calculates an individual, easy-to-understand health and performance index based on official limit values, recommendations from health organizations and scientific studies.
Safety in critical situations
The air-Q keeps a second-by-second eye on critical values and immediately raises the alarm in dangerous situations with a loud tone and push or email notifications — for example in the case of smoke and fire, or life-threatening levels of carbon monoxide or methane (heating gas) — or simply as a warning device for unauthorized entry.
A central role in the Smart Home / Office
The air-Q supports many smart home standards (Homematic, openHAB, FHEM, Homey, IFTTT). You can even talk to the air-Q via the Alexa and Google Home voice assistants. Thanks to its wide range of sensors, it’s a reliable source for controlling ventilation systems, air filters, windows, thermostats and more — it can even detect people in the room.
The air-Q air analyzer in live smart home use at home
We put the air-Q through a live test under our own supervision. Many features are tried out and questions about our smart air monitor are answered. The use of the app and smart home functions is tested. This shows how the air-Q can function as a smart smoke detector.
Certified Quality
The WELL standard is an international rating system for building certification, developed and regulated by the Well Building Institute (IWBI) in the USA. It is the first standard of its kind to focus exclusively on the health and well-being of people in buildings. The air-Q meets the high standards WELL requires for air quality measurement and is certified by IWBI.



















